Velkommen til vår butikk på nett!

Crown XTi4000:forsterker med DSP, 2 x 1200W i 4ohm

Crown

Bli den første som omtaler dette produktet

Tilgjengelighet: På lager i Norge

kr 16 820,00
Fra/måned
Måned Sum/måned
Konto kr 1 009,00
36 mnd kr 625,00
24 mnd kr 856,00
12 mnd kr 1 558,00
6 mnd kr 2 803,00
3 mnd kr 5 607,00
More info
More info
ELLER

Produktinformasjon

Crown XTi-4000 yter 2 x 1200W i 4 ohm og er dedikert live markedet. Den har innebygget digital prosessering med presett for mange JBL systemer. DSP modulen inneholder delefilte, equalisere, delay og limiter.

Crown XTi4000:forsterker med DSP, 2 x 1200W i 4ohm

Dobbelklikk på bildet for å se det i full størrelse

Zoom ut
Forstørre

Flere visninger

Detaljer

ul>li>Crown XTi-4000 yter 2 x 1200W i 4 ohm og er dedikert live markedet. Den har innebygget digital prosessering med presett for mange JBL systemer. DSP modulen inneholder delefilte, equalisere, delay og limiter./li>li style="font-weight: bold; font-style: italic;">XTi-4000 har følgende effekter:/li>li style="font-weight: bold; font-style: italic;">2 x 1600W i 2 ohm/li>li style="font-weight: bold; font-style: italic;">2 x 1200W i 4 ohm/li>li style="font-weight: bold; font-style: italic;">1 x 3200W brokoblet i 4 ohm/li>li>XTi serien forsterkere kobles opp mot PC via USB og styres med Harman "HiQnet System Architect software" som medfølger. Den kan også settes opp ved hjelp av LCD skjermen i frontpanelet og funksjonsknapper. Oppsettmenyen er enkel og intuitiv og leder deg gjennom programmeringen./li>li>Oppkoblingen av forsterker er med ballansert XLR-3 med link på innganger og Seakon 4P på utganger. /li>/ul>

Tilleggsinformasjon

Teknisk info
  • DSP Section
  • Input EQ: 6 parametric fi lters per channel with
  • adjustable Q, ±15 dB boost/cut. Also adjustable
  • high and low shelving fi lters. This 8-fi lter EQ
  • section can be bypassed.
  • Crossover Filters: Highpass and lowpass per
  • channel. Butterworth 6/12/18/24 dB per octave.
  • Linkwitz-Riley 24/48 dB per octave. Also
  • includes ±15 dB bandpass gain and polarity
  • control.
  • Delay: For signal alignment of driver; 50 mS
  • total delay.
  • Subharmonic Synthesizer: Takes the lowfrequency
  • content of the input signal and
  • “synthesizes” a new signal that is the same
  • as the input signal but one octave lower. The
  • new synthesized signal is then mixed with the
  • original signal to create the effect.
  • Output Limiter: Prevents clipping.
  • Presets: 20 presets, 19 of which are user-defi
  • nable.
  • Front Panel Controls and Indicators
  • Level: Detented rotary level control, one per
  • channel.
  • Power Switch: On/off switch applies AC power
  • to the amplifi er.
  • Sel/Prev/Next Buttons: Three buttons near the
  • LCD screen are used to access menu items and
  • front panel lockout.
  • LCD Screen: Backlit liquid crystal display
  • shows speaker presets.
  • Signal Indicator: Green LED, one per channel,
  • illuminates when a very low-level signal is present
  • at input. May be used for troubleshooting
  • cable runs.
  • –10 Indicator: Green LED fl ashes when output
  • signal exceeds –10 dB below clip.
  • –20 Indicator: Green LED fl ashes when output
  • signal level exceeds –20 dB below clip.
  • Ready Indicator: Green LED, one per channel,
  • illuminates when the amplifi er is ready to
  • produce audio.
  • Clip Indicator: Red LED, one per channel, turns
  • on at the threshold of audible distortion.
  • Temp Indicator: Red LED, one per channel,
  • illuminates under excessive temperature conditions.
  • Power Indicator: Blue LED illuminates when
  • the amplifi er has been turned on and has
  • power.
  • Rear Panel Controls and Connectors
  • AC Line Connector:
  • XTi 1K, 2K, 4K: NEMA 5-15P (15A).
  • XTi 6K: NEMA 6-20P (20A)
  • IEC C20 (20A)
  • Input Connector: XLR, one per channel.
  • Link/Out Connector: Loop-thru signal from
  • input connector for linking to another amplifi er,
  • one per channel.
  • Output Connectors: Two Neutrik® Speakon®
  • NL4MP (mates with NL4FC) output connectors.
  • Channel-1 Speakon® is wired with Ch. 1
  • and Ch. 2 outputs for use with optional single
  • 4-conductor cable. Two binding post outputs
  • (in parallel with Speakon® connectors).
  • HiQnet USB Connector: Type B, connects to a
  • HiQnet network.
  • Protection
  • XTi-Series amplifi ers are protected against
  • shorted, open or mismatched loads; overloaded
  • power supplies; excessive temperature; chain
  • destruction phenomena; excessive output
  • current, input overload damage; and high-frequency
  • blowups. They also protect loudspeakers
  • from input/output DC, large or dangerous
  • DC offsets and turn-on/turn-off transients.
  • Construction
  • Chassis: Steel.
  • Cooling: Proportional speed fan with front-torear
  • airfl ow.
  • Dimensions: EIA Standard 19-in. rack mount
  • width (EIA RS-310-B), 3.5 in. (8.9 cm) high and
  • 12.25 in. (31.11 cm) deep behind mounting
  • surface. XTi 6000 is 16.2 in. (41.15 cm) deep.
  • Net Weight:
  • XTi 1K, 2K, 4K: 18.5 lb (8.4 kg).
  • XTi 6K: 24.0 lb (10.9 kg).
  • Shipping Weight:
  • XTi 1K, 2K, 4K: 21.5 lb (9.8 kg).
  • XTi 6K: 30.0 lb (13.6 kg).
  • Optional Accessory:
  • Rear rack-ear support for XTi 6000
Produktmerke Crown
Prisnivå kr 16 820,00
Bilde galleri NA

Produkttagger

Bruk mellomrom for å skille tagger. Omgi setninger med apostrof (').

Nylig viste produkter

  1. Crown XTi2000: forsterker med DSP, 2 x 800W i 4ohm

  2. Crown I-Tech 5000 HD forsterker 2 x 2500W i 4 Ohm

  3. Crown I-Tech 12000 HD forsterker 2 x 4500W i 4 Ohm

  4. Alctron PM01 3 stk Vokalmikrofoner m/klype i koffert

  5. Alctron MC410 Stormembranmikrofon

Handlekurv

Du har ingen varer i handlekurven.

Avstemming

Hvilken forsterker liker du best?

Mer informasjon
We Accept All Major Credit Cards

Nyheter, rabatter og spesialtilbud

Få tilsendt nyheter & tilbud via vårt nyhetsbrev

© 2012 SCENARIO AS. All Rights Reserved.
Fueled by: Benzin.no - Høyoktane løsninger